UHD-IPC230-WPE is a 4K@60Hz 18Gbps 4:4:4 HDR HDMI Wall Plate Extender Over 70M CAT6, with zero latency and visually lossless compression transmission. It supports PoC, IR control, 3.5mm audio output, etc.
This kit is a reliable, ultra-high-definition video transmission solution, which is widely used in security monitoring, home theater, broadcasting, and other fields.
AUDIO AND VIDEO
Transmitter:
INPUT PORTS:
1x HDMI Type A female
OUTPUT PORTS:
1x RJ45 female
1x IR OUT [3.5mm Stereo Mini-jack]
Receiver:
INPUT PORTS:
1x RJ45 female
1x IR IN [3.5mm Stereo Mini-jack]
OUTPUT PORTS:
1x HDMI Type A female
AUDIO OUTPUT:
1x 3.5mm L/R female
COMPLIANCES
HDMI Compliance:
HDMI 2.0 (Deep color, 4K, HDR, YUV 4:4:4)
HDCP Compliance:
HDCP 2.2, HDCP 1.4
SUPPORTED CAT CABLES
CAT5e, CAT6, CAT7:
We recommend you to use shielded CAT6 cables & High-Quality HDMI Cables for optimum performance
Yes, you can purchase these things directly from us. Please contact us & we will assist you further.
No, this product does not extend multiple screens. It will duplicate the input sources to multple outputs.
Yes, you will be able to get a signal beyond the mentioned distance but the quality of the video decreases with increase in the distance and that too when using with shielded CAT6 cable.
Yes, you can implement the daisy chain method.
Both the ends of the CAT cable should be termed as EIA-568B & the cable should be straight & not crossed.
We recommend you to use High-Quality HDMI cables & shielded CAT6 cables.
Yes, you can purchase the additional transmitter from us. Please contact us & we will let you know the price.
Yes, you can purchase the additional receiver from us. Please contact us & we will let you know the price.
You can extend the display devices up to 165 Feet when using with a shielded CAT6 cable.
The issue might be with the CAT cable. This might be due to the external interference of the signals & CAT5e has low bandwidth as compared to the CAT6. We recommend you using shielded CAT6 cable.
If the power and link led lights does not illuminate on the RJ45 port of the transmitter and the receiver, then the transmitter & receiver might be dead.
Please contact us so that we can troubleshoot the issue.