Decodes DTS/Dolby Digital source digital audio to analog 2.0CH stereo audio output (RCA L/R and 3.5mm Headphone), Supports Digital Audio Input: SPDIF (Optical), Coaxial - Make sure switch to the correct input on the side
Supports simultaneous RCA L/R and 3.5mm Headphone outputs
Make sure the the plastic removed. And the Optical Cable is pushed in completely.
TROUBLESHOOT: Signal from the TV goes into SPDIF (Optical), or Coxial input of the DA34 and The output of RCA or Headphones will go into your analog speakers or headphones. Make sure the power adapter is connect properly. And all the cables are inserted all the way in. If there is still no sound, please change the TV Audio out to PCM Only from the TV Menu.
Converts coaxial or optical digital audio input to analog stereo output over RCA and 3.5mm mini jack. Will not convert Dolby Digital Signal. Make sure to change to TV Output To PCM
Supports all popular sample rates including 32kHz, 44.1kHz, 48kHz, 96kHz and 192kHz, at up to 24-bit resolution
This Device will not convert Dolby Sound. It is only a converter not a Decoder. So make sure your device does not require Dolby conversion.
TROUBLE SHOOT - If your getting a Clicking Sound - Most likely your TV output is not set to PCM. Please change it PCM. Or if your getting Screeching or No Sound - Most likely you are trying to decode Dolby Sound to Analog. You will need a DA34 or DA34X
INCLUDES DA21 Converter, Power supply, User Manual
