Bi-directional IR control – Control the source from the display location and vice versa
RS-232 pass-through – Integrates with control systems for flexible device management
Power Over Cable (PoC) – Only one power adapter needed for both units
Compact and durable design – Easy to install in home theaters or commercial environments
The UHD-EXB132AR-K is a high-performance HDMI over Ethernet extender that transmits uncompressed 4K@60Hz signals up to 230ft/70m using a single CAT 6/6A/7 cable. It is fully HDMI 2.0b and HDCP 2.2 compliant with support for 18Gbps bandwidth, delivering sharp, vivid video with HDR10, Dolby Vision, and HLG passthrough.
The extender features ARC audio return, allowing audio from an ARC-enabled TV to be sent back to the Transmitter’s HDMI IN or Optical port. It also supports optical audio from the Receiver to the Transmitter, ideal for flexible audio setups.
Additional features include bi-directional IR and RS-232 pass-through for complete control between source and display. With built-in Power over Cable (PoC), only one power adapter is needed for the entire setup. Its compact and durable design makes it a great choice for both commercial installations and home theaters.
CONNECTIVITY
Transmitter:
INPUT:
1 × HDMI [Type A, 19-pin female]
OUTPUT:
1 × HDBaseT [RJ45, 8-pin female]
1 × L/R [3.5mm Stereo Mini-jack]
1 x OPTICAL [S/PDIF, female]
CONTROL:
1 × IR IN [3.5mm Stereo Mini-jack]
1 × IR OUT [3.5mm Stereo Mini-jack]
1 × RS-232 [D-Sub 9]
1 x SERVICE [Micro-USB, Update port]
Receiver:
INPUT:
1 × HDBaseT[RJ45, 8-pin female]
1 x OPTICAL [S/PDIF, female]
OUTPUT:
1 × HDMI [Type A, 19-pin female]
CONTROL:
1 × IR IN [3.5mm Stereo Mini-jack]
1 × IR OUT [3.5mm Stereo Mini-jack]
1 × RS-232 [D-Sub 9]
1 x SERVICE [Micro-USB, Update port]
PACKAGE CONTENTS
1x Transmitter
1x Receiver
1x IR Blaster Cable
1x IR Receiver Cable
2x 3-Pin Phoenix Connector
4x Mounting Ears
1x Power Adapter
User Manual
SUPPORTED CAT CABLES
CAT5e, CAT6, CAT7:
We recommend you use shielded CAT6 cables & High-Quality HDMI Cables for optimum performance
Yes, you can purchase these things directly from us. Please contact us & we will assist you further.
No, this product doesn not extend multiple screens. It will duplicate the input sources to multple outputs.
Yes, you will be able to get a signal beyond the mentioned distance but the quality of the video decreases with increase in the distance and that too when using with shielded CAT6 cable.
Yes, you can implement the daisy chain method.
Both the ends of the CAT cable should be termed as EIA-568B & the cable should be straight & not crossed.
We recommend you to use High-Quality HDMI cables & shielded CAT6 cables.
Yes, you can purchase the additional transmitter from us. Please contact us & we will let you know the price.
Yes, you can purchase the additional receiver from us. Please contact us & we will let you know the price.
No, this product doesn't upscale/downscale the video resolutions.
You can extend the display devices up to 400 Feet when using with a shielded CAT6 cable.
The issue might be with the CAT cable. This might be due to the external interference of the signals & CAT5e has low bandwidth as compared to the CAT6. We recommend you using shielded CAT6 cable.
If the power and link led lights does not illuminate on the RJ45 port of the transmitter and the receiver, then the transmitter & receiver might be dead.
Please contact us so that we can troubleshoot the issue.
You can upgrade the firmware by connecting the PC & this device via RS-232 cable.
Please note that this product only supports the CEC function between HDMI input & HDMI output 1.
No, optical output doesn't supports CEC due to its limitations. CEC will work only with HDMI devices.
HDBaseT is the technology used for long distance transmission of lossless signals, resulting extremely low latency & giving the best picture quality.
In normal extenders, if you extend your signals up to some extend, the quality of the signals will degrade & you may find some latency issues. HDBaseT is the lastest standard which provides extending your signals to the longer distance without degrading the quality of the signals & with 0 latency.
We recommend you using a shielded CAT6 cables for optimum performance.
Our all the extenders supports IR Frequency & the devices using RF frequency will not be compatible with our products.
The IR Blaster/Emitter should be connected to the IR out port on the Transmitter and the IR Receiver should be connected to the IR in on the Receiver.
UHD-EXB132AR-K User Manual Download
UHD-EXB132AR-K Specifications Sheet
