1x2 HDMI Splitter: 1-in 2-out, UltraHD 4K, Downscale, EDID (UHD-PRO102)

Shipping calculated at checkout.

  • Split 1 HDMI Source to 2 identical displays - 3D Support
  • Video resolution upto 4K x 2K@60Hz 4:4:4 - 4K > 1080p downscaling function
  • Dolby Vision, HDR - EDID Control
  • Compliance: HDMI 1.3, 1.4, 2.0 - HDCP 1.4, 2.2
Overnight shipping*:
Two days shipping:

*Overnight shipping doesn't include Weekends, or any holidays.

Reseller & Installer Discounts
Add to Wishlist
30 Days Return
30 Days Return
1 Year Warranty
1 Year Warranty
No-Contact Delivery
Free shipping in USA

OREI UHD PRO -102: 1x2 HDMI Splitter

Key Features:
  • HDMI 2.0 Ultra HD video format supported
  • Supports up to 4K@60Hz & 3D video format
  • Pixel clock rate up to 18Gb/s
  • Supports output down-scaling for 4K@60Hz content to 1080@60Hz display
  • Dual EDID detection mode selection *(HCF/Priority Switch)
  • DTS HD, Dolby TrueHD lossless digital audio compliant
  • HDCP 2.2 compliant
  • Maintain the same image quality as source, up to 4K@60Hz. (Using Premium HDMI cable)
  • No loss transmission with amplifier and equalizer function (up to 15 feet premium HDMI cable)

Few sample applications:

The OREI UHD-PRO102 is a reliable distribution amplifier powered splitter that will take HDMI signal up to 4Kx2K@60Hz and duplicate the signal to up to 2 HDMI displays simultaneously, creating an impressive lossless image or audio transmission via HDMI cable.

Compact, durable and easy to setup and operate. Ideal for trade show, conference room, lecture halls, bed room, living room, kitchen room and backyard.

Please note that this HDMI splitter will duplicate the source to the two output displays. It can’t be used to extend a desktop for PC or a laptop. If the connected displays do not support the same resolution then the splitter will lower the output resolution to the next best resolution supported by both displays and same goes with the audio signal. We recommend using this splitter with high quality HDMI cables 30 feet or less.

EDID management switch – Set on COPY to copy the supported audio signal from HDMI output 1 to the HDMI output 2 display. Set on AUTO to automatically detect and send the same audio signal supported by both displays.